UNPACKING
Remove
the Packing List
and verify that you
have received all
equipment. If you
have any questions
about the shipment,
please call the Newport
Customer Service
Department at 714-540-4914.
When you receive
the shipment, inspect
the container and
equipment for any
signs of damage.
Note any evidence
of rough handling
in transit. Immediately
report any damage
to the shipping agent.
NOTE: The
carrier will not
honor any claims
unless all shipping
material is saved
for their examination.
After examining and
removing contents,
save packing material
and carton in the
event reshipment
is necessary.
Make sure the
packing box contains
the following:
1 soft carrying
case
1 9V alkaline
battery
1 wire brush
1 bottle of
buffer solution (pH
7.00)
1 OperatorÆs
Manual
The carrying case
contains the following:
1 small screwdriver
1 package
of detergent powder
(may be labelled
ôALCONOXö)
1 DSPH-1 or
TDS-4 Meter.
DESCRIPTION
The
NEWPORT®
DSPH-1 and TDS-4
meters feature both
pH and conductivity
measurements in one
handheld instrument.
The DSPH-1 measures
pH from 0 to 14 and
conductivity from
0 to 19,999 ╡mhos.
The TDS-4 extends
the conductivity
capability to 199,999
╡mhos. While in use,
the electrodes fold
out and lock into
a 90░ or 180░ position.
When testing is completed,
the electrodes fold
back into the instrument
case. Recessed switches
control all functions
and an easy-access
panel reveals adjustments
for pH calibration
and slope, and zero
and span for conductivity.
Figure
1.
PARTS OF THE METER
|